Support
Instruction manual
Radio-Controlled Watch Instructions
- Press and hold button T1 for more than 3 seconds until the hands start moving.
- The hands will advance to the 12:00 o'clock position.
- Hold your watch still and away from possible sources of interference (e.g. telephone, PC, TV).
- After a few minutes, your watch will set itself automatically.
- Your watch is now set.
Standard instructions
- Pull the crown out to its middle position 2.
- Turn the crown to set the date.
- Pull the crown right out 3.
- Turn the crown to set the time.
- Afterwards, press the crown back into its original position 1.
- Your watch is now set
Instructions for solar watch
- Pull the crown out to its middle position 2.
- Turn the crown to set the date.
- Pull the crown right out 3.
- Turn the crown to set the time.
- Afterwards, press the crown back into its original position 1.
- Your watch is now set.
Instructions for automatic watch
- Pull the crown out to position 2 and turn it clockwise until the current date is shown.
- Push the crown back to position 1.
- Pull the crown out to position 3 and turn it clockwise until the current time is displayed.
- Take care whether it is morning or afternoon in order to set the current time correctly.
- Push the crown back to position 1.
Important: Do not set the date between 9 p.m. and 1 a.m., otherwise the switching mechanism will be damaged.
Instructions for multifunction watch
- Pull out the crown to the middle position 2.
- And turn it anti clockwise to set the date.
- Pull the crown right out 3.
- And turn it clockwise to set the day and hour.
- Then set the time. Afterwards, press the crown back into its original place 1.
- Your watch is now set.
Instructions for chronograph
- Press button A. to start or stop the stop watch.
- Pull out the crown to the middle position 2 and turn it to set the date.
- Pull the crown right out 3 and turn it to set the time.
- Afterwards, press the crown back into its original position 1.
- Your watch is now set.
- To reset the stopwatch in its original position press the button B.
Instructions for adjustable meshband
- BERING soft meshbands are easily adjustable.
- Simply insert a small screwdriver or similar tool into the clasp as shown in picture.
- Lift up the clasp and move to desired position. Snap closed securely.
- Make sure the clasp is set in one of the indentations on the back of the band.
- Link bands are completely adjustable anywhere watches are serviced.
How to use the clasp
Open
- Open the security clasp
- Pull the hook over the pin
Close
- Close clasp (it should snap)
- Close the security clasp
