Arctic Symphony | dark grey | 568-80-X2
Free shipping on orders over $29- Order number: 568-80-X2-US
This slim inner ring made of dark gray stainless steel features a bold hammered surface. The textured finish gives the ring a strong visual impact and resembles volcanic rock formations.
At 8.0 mm wide, it pairs perfectly with outer rings in the BERING Twist & Change System. The dark, matte texture provides a striking contrast, especially against sleek or polished designs.
| Collection: | Arctic Symphony |
| Product type: | inner ring |
| Gender: | unisex |
| Color: | dark grey |
| Material: | stainless steel |
| Type: | slim |
| Width: | 8,0 mm |
INTERNATIONAL RING SIZE GUIDE X
| EU (mm) | US | UK | Diameter (mm) |
|---|---|---|---|
| 50 | US 5 | J | 15,7 |
| 52 | US 6 | L | 16,5 |
| 55 | US 7 | N | 17,4 |
| 57 | US 8 | P | 18,2 |
| 60 | US 9 | R | 19,0 |
| 63 | US 10 | T | 19,8 |
| 65 | US 11 | V | 20,6 |
| 68 | US 12 | X | 21,5 |
| 70 | US 13 | Z | 22,3 |
| 73 | US14 | Z+1 | 23,0 |
| 75 | US15 | Z+2 | 23,8 |
WHICH INNER RING FITS AN OUTER RING
Please note the following special feature if you do not order a ready made combination or starter set. In order for an inner ring to fit onto an outer ring, the inner ring must be two numbers larger. You will find an overview of this in the table below.
| BERING Size | Outer Ring EU (mm) | Inner Ring EU (mm) | Outer Ring Diameter (mm) | Inner Ring Diameter (mm) |
|---|---|---|---|---|
| 3 | - | 50 | - | 15,9 |
| 4 | - | 52 | - | 16,4 |
| 5 | 50 | 55 | 15,7 | 17.2 |
| 6 | 52 | 57 | 16,5 | 18,0 |
| 7 | 55 | 60 | 17,4 | 18,9 |
| 8 | 57 | 63 | 18,2 | 19,7 |
| 9 | 60 | 65 | 19,0 | 20,5 |
| 10 | 63 | 68 | 19,8 | 21,3 |
| 11 | 65 | 70 | 20,6 | 22,0 |
| 12 | 68 | 73 | 21,5 | 23,0 |
| 13 | 70 | 75 | 22,3 | 23,8 |
DETERMINE THE CORRECT RING SIZE
METHOD 1 - the easy one (diameter)
You already have a ring at hand? Then simply measure the diameter of the ring. You will find your size at the top of the international table
METHOD 2 - the creative one (circumference)
To find out your ring size, all you need is a piece of thread or dental floss or a piece of paper. Wrap it rather tightly around the spot on the finger where you want to wear the ring and mark the place where it overlaps. Measure the length afterwards. The measured millimetres reflect the inner ring circumference.
USEFUL HINTS:
- A ring should never be too loose or too tight, so as not to restrict the pleasant feeling of wearing it. If you are unsure, method 1 (diameter) is more precise.
- Fingers can change slightly depending on the time of year, time of day and age. For example, fingers are a little wider in the evening and when they are warm than in the morning, and when they are cold. Our tip - measure your size in the evening.
