INSTRUCTION MANUAL
STANDARD INSTRUCTIONS
Pull the crown out to its middle position 2. Turn the crown to set the date. Pull the crown right out 3. Turn the crown to set the time. Afterwards, press the crown back into its original position 1. Your watch is now set.
Instruction Manual (PDF)
INSTRUCTIONS FOR SOLAR WATCH
Pull the crown out to its middle position 2. Turn the crown to set the date. Pull the crown right out 3. Turn the crown to set the time. Afterwards, press the crown back into its original position 1. Your watch is now set.
Important: Do not set the date between 9 p.m. and 1 a.m., otherwise the switching mechanism will be damaged.
Instruction Manual (PDF)
INSTRUCTIONS FOR AUTOMATIC WATCH
Pull the crown out to position 2 and turn it clockwise until the current date is shown. Push the crown back to position 1. Pull the crown out to position 3 and turn it clockwise until the current time is displayed. Take care whether it is morning or afternoon in order to set the current time correctly. Push the crown back to position 1.
Instruction Manual (PDF)
INSTRUCTIONS FOR RADIO-CONTROLLED WATCH
Press and hold button 1 down until all three hands are set in motion.
Release the button and wait until the hands stop.
If all hands stop exactly at the 12 o’clock position, the automatic adjustment is completed.
Instruction Manual (PDF)
INSTRUCTIONS FOR MULTIFUNCTION WATCH
Pull out the crown to the middle position 2. and turn it anti clockwise to set the date.
Pull the crown right out 3. and turn it clockwise to set the day and hour.
Then set the time. Afterwards, press the crown back into its original place 1.
Your watch is now set.
Instruction Manual (PDF)
INSTRUCTIONS FOR CHRONOGRAPH
Press button A. to start or stop the stop watch.
Pull out the crown to the middle position 2. and turn it to set the date.
Pull the crown right out 3. and turn it to set the time.
Afterwards, press the crown back into its original position 1.
Your watch is now set.
To reset the stopwatch in its original position press the button B.
Instruction Manual (PDF)
INSTRUCTIONS FOR DAY DATE
Pull the crown out to position 3 and turn it to set the hour and minute hands. When the crown is pushed back into position 1, the second hand starts to move. Your watch is now set.
Instruction Manual (PDF)
INSTRUCTIONS FOR ADJUSTABLE MESHBAND
BERING soft meshbands are easily adjustable.
Simply insert a small screwdriver or similar tool into the clasp as shown in picture.
Lift up the clasp and move to desired position. Snap closed securely.
Make sure the clasp is set in one of the indentations on the back of the band.
Link bands are completely adjustable anywhere watches are serviced.
Instruction Manual (PDF)
HOW TO USE THE CLASP
OPEN
- Open the security clasp
- Pull the hook over the pin
CLOSE
- Close clasp (it should snap)
- Close the security clasp
Instruction Manual (PDF)